List of products by brand Makita

Makita's 6922NB ¾ in. Shear Wrench features: Anti-slipping mechanism: tool won't start until inner sleeve engages with bolt tip. Handy tip lever for ejecting sheared tips. Compact and light weight. Rubber bumper for tool body protection. Bolt size: 5/8 inch, 3/4 in. and 7/8 in. Delivers 600 ft.lbs. of Max Torque.

Tough on concrete, not on you. Makita’s hard-hitting HM1810 70 lb. Breaker Hammer is equipped with Anti-Vibration Technology (AVT), an exclusive counterbalance system that reduces vibration. The result is more efficient hitting on the concrete and less vibration in the tool – and the tool user.

The new 70 lb. AVT Breaker Hammer (model HM1812) is engineered to hit like an air hammer, but with less noise and vibration. It has a powerful 15 AMP motor that delivers a full 53.9 ft.lbs. (73.8 Joules) of impact energy, so contractors get hard-hitting performance. Users also benefit from less noise and lower vibration than an air hammer, and zero hassle with an air hose and compressor. The HM1812 features the latest Advanced AVT Technology, a synchronized three-component system that more effectively reduces vibration.

Makita’s hard-hitting HM1317CB 42 lb. Breaker Hammer is engineered for heavy chipping, demolition and breaking applications, but with less vibration for increased user comfort. The HM1317CB is equipped with Anti-Vibration Technology (AVT), an internal counterbalance system that is engineered into the tool for more effective vibration reduction. It is an ideal solution for heavy structural demolition like breaking up driveways and sidewalks, as well as for landscape and trenchwork, asphalt removal, driving ground rods, and more.

The Makita HM1307CB 35 lb. Demolition Hammer combines hard-hitting power with additional features including soft start and a variable speed control dial for improved performance. The HM1307CB accepts 1-1/8” Hex Bits, and is ideal for both horizontal and vertical demolition and breaking applications.

Compressors are workhorse tools on the job site, and Makita compressors are contractor favorites for their faster recovery time, lower noise, longer tool life, and consistent job site performance. The 5.5 HP Big Bore™ Gas Air Compressor (MAC5501G) has a powerful Honda GX160 4-stroke engine for increased performance and superior reliability, with a “V” Twin style pump that runs cooler and provides up to 12.5 CFM at 100 PSI for faster recovery. Cast iron pump with Big Bore™ cylinder and piston is engineered to provide durability and faster recovery time for improved performance.

The 14” MM4 4-Stroke Power Cutter (model EK7651H) is the world's first 4-stroke power cutter. The EK7651H is another innovation in Makita’s expanding line-up of concrete solutions.

The 2” AVT Rotary Hammer (model HR5212C) has over 45% less vibration than the previous model. It is engineered with enhanced Anti-Vibration Technology (AVT), a synchronized three-component system for significantly less vibration. The result of the enhanced AVT is a category-leading vibration rating of 9m/s².

The 18V X2 LXT Brushless Robotic Vacuum (tool only, batteries and charger sold separately) is a cordless solution that automatically cleans large flooring spaces in commercial environments. The DRC200Z features an efficient brushless motor engineered for extended run time and longer tool life. Just turn it loose with two fully-charged 18V LXT Lithium-Ion 5.0Ah batteries (sold separately) and it will clean approximately 5,380 sq.ft. of hard flooring (or up to 200 minutes of continuous operation in “Main Brush plus Vacuum” mode).

Makita has an expanding line of laser instruments engineered for increased accuracy and productivity. The 12V max CXT Self-Leveling Multi-Line Green Laser (SK209GDZ, tool only, batteries and charger sold separately) is a highly precise, highly visible and durable laser for leveling, aligning, plumbing, and squaring. The green beam laser technology provides increased visibility in bright light job site environments, and fast self-leveling line stability is achieved in 3 seconds for increased productivity.

Tough on concrete, not on you. Makita’s hard-hitting HM1214C 27 lb. Breaker Hammer is equipped with Anti-Vibration Technology (AVT), an exclusive counterbalance system that reduces vibration. The result is more efficient hitting on the concrete and less vibration in the tool – and the tool user.

The Makita 23 lb. AVT Demolition Hammer has a powerful 14 AMP motor that delivers 18.8 ft.lbs. of impact energy to handle the most demanding applications. It weighs 23.8 lbs.